3. Functions¶

3.1. Definitions and use¶

In the context of programming, a function is a named sequence of statements that performs a desired operation. This operation is specified in a function definition. In Python, the syntax for a function definition is:

def NAME( LIST OF PARAMETERS ):
    STATEMENTS

You can make up any names you want for the functions you create, except that you can’t use a name that is a Python keyword. The list of parameters specifies what information, if any, you have to provide in order to use the new function.

There can be any number of statements inside the function, but they have to be indented from the def. In the examples in this book, we will use the standard indentation of four spaces. Function definitions are the first of several compound statements we will see, all of which have the same pattern:

A header, which begins with a keyword and ends with a colon.
A body consisting of one or more Python statements, each indented the same amount – 4 spaces is the Python standard – from the header.

In a function definition, the keyword in the header is def, which is followed by the name of the function and a list of parameters enclosed in parentheses. The parameter list may be empty, or it may contain any number of parameters. In either case, the parentheses are required.

The first couple of functions we are going to write have no parameters, so the syntax looks like this:

def new_line():
    print("")          # a print statement with an empty string prints a new line

This function is named new_line. Its body contains only a single statement, which outputs a newline character. (That’s what happens when you use a print command with an empty string.)

Defining a new function does not make the function run. To do that we need a function call. Function calls contain the name of the function being executed followed by a list of values, called arguments, which are assigned to the parameters in the function definition. Our first examples have an empty parameter list, so the function calls do not take any arguments. Notice, however, that the parentheses are required in the function call:

print("First Line.")
new_line()
print("Second Line.")

The output of this program is:

First line.

Second line.

The extra space between the two lines is a result of the new_line() function call. What if we wanted more space between the lines? We could call the same function repeatedly:

print("First Line.")
new_line()
new_line()
new_line()
print("Second Line.")

Or we could write a new function named three_lines that prints three new lines:

def three_lines():
    new_line()
    new_line()
    new_line()

print("First Line.")
three_lines()
print("Second Line.")

This function contains three statements, all of which are indented by four spaces. Since the next statement is not indented, Python knows that it is not part of the function.

You should notice a few things about this program:

You can call the same procedure repeatedly. In fact, it is quite common and useful to do so.
You can have one function call another function; in this case three_lines calls new_line.

So far, it may not be clear why it is worth the trouble to create all of these new functions. Actually, there are a lot of reasons, but this example demonstrates two:

Creating a new function gives you an opportunity to name a group of statements. Functions can simplify a program by hiding a complex computation behind a single command and by using English words in place of arcane code.
Creating a new function can make a program smaller by eliminating repetitive code. For example, a short way to print nine consecutive new lines is to call three_lines three times.

Pulling together the code fragments from the previous section into a script named tryme1.py, the whole program looks like this:

def new_line():
    print("")

def three_lines():
    new_line()
    new_line()
    new_line()

print("First Line.")
three_lines()
print("Second Line.")

This program contains two function definitions: new_line and three_lines. Function definitions get executed just like other statements, but the effect is to create the new function. The statements inside the function do not get executed until the function is called, and the function definition generates no output.

As you might expect, you have to create a function before you can execute it. In other words, the function definition has to be executed before the first time it is called.

3.2. Flow of execution¶

In order to ensure that a function is defined before its first use, you have to know the order in which statements are executed, which is called the flow of execution.

Execution always begins at the first statement of the program. Statements are executed one at a time, in order from top to bottom.

Function definitions do not alter the flow of execution of the program, but remember that statements inside the function are not executed until the function is called. Although it is not common, you can define one function inside another. In this case, the inner definition isn’t executed until the outer function is called.

Function calls are like a detour in the flow of execution. Instead of going to the next statement, the flow jumps to the first line of the called function, executes all the statements there, and then comes back to pick up where it left off.

That sounds simple enough, until you remember that one function can call another. While in the middle of one function, the program might have to execute the statements in another function. But while executing that new function, the program might have to execute yet another function!

Fortunately, Python is adept at keeping track of where it is, so each time a function completes, the program picks up where it left off in the function that called it. When it gets to the end of the program, it terminates.

What’s the moral of this sordid tale? When you read a program, don’t read from top to bottom. Instead, follow the flow of execution.

3.3. Parameters, arguments, and the `import` statement¶

Most functions require arguments, values that control how the function does its job. For example, if you want to find the absolute value of a number, you have to indicate what the number is. Python has a built-in function for computing the absolute value:

>>> abs(5)
5
>>> abs(-5)
5

In this example, the arguments to the abs function are 5 and -5.

Some functions take more than one argument. For example the built-in function pow takes two arguments, the base and the exponent. Inside the function, the values that are passed get assigned to variables called parameters.

>>> pow(2, 3)
8
>>> pow(7, 4)
2401

Another built-in function that takes more than one argument is max.

>>> max(7, 11)
11
>>> max(4, 1, 17, 2, 12)
17
>>> max(3 * 11, 5**3, 512 - 9, 1024**0)
503

max can be sent any number of arguments, separated by commas, and will return the maximum value sent. The arguments can be either simple values or expressions. In the last example, 503 is returned, since it is larger than 33, 125, and 1.

Here is an example of a user-defined function that has a parameter:

def print_twice(param):
    print(param)
    print(param)

This function takes a single argument and assigns it to the parameter named param. The value of the parameter (at this point we have no idea what it will be) is printed twice, each followed by a newline. The name param was chosen to reinforce the idea that it is a parameter, but in general, you will want to choose a name for your parameters that describes their use in the function.

The interactive Python shell provides us with a convenient way to test our functions. We can use the import statement to bring the functions we have defined in a script into the interpreter session. To see how this works, assume the print_twice function is defined in a script named chap03.py. We can now test it interactively by importing it into our Python shell session:

>>> from chap03 import *
>>> print_twice('Spam')
Spam
Spam
>>> print_twice(5)
5
5
>>> print_twice(3.14159)
3.14159
3.14159

In a function call, the value of the argument is assigned to the corresponding parameter in the function definition. In effect, it is if param = 'Spam' is executed when print_twice('Spam') is called, param = 5 in print_twice(5), and param = 3.14159 in print_twice(3.14159).

Any type of argument that can be printed can be sent to print_twice In the first function call, the argument is a string. In the second, it’s an integer. In the third, it’s a float.

As with built-in functions, we can use an expression as an argument for print_twice:

>>> print_twice('Spam' * 4)
SpamSpamSpamSpam
SpamSpamSpamSpam

'Spam'*4 is first evaluated to 'SpamSpamSpamSpam', which is then passed as an argument to print_twice.

3.4. Composition¶

Just as with mathematical functions, Python functions can be composed, meaning that you use the result of one function as the input to another.

>>> print_twice(abs(-7))
7
7
>>> print_twice(max(3, 1, abs(-11), 7))
11
11

In the first example, abs(-7) evaluates to 7, which then becomes the argument to print_twice. In the second example we have two levels of composition, since abs(-11) is first evaluated to 11 before max(3, 1, 11, 7) is evaluated to 11 and print_twice(11) then displays the result.

We can also use a variable as an argument:

>>> sval = 'Eric, the half a bee.'
>>> print_twice(sval)
Eric, the half a bee.
Eric, the half a bee.

Notice something very important here. The name of the variable we pass as an argument (sval) has nothing to do with the name of the parameter (param). Again, it is as if param = sval is executed when print_twice(sval) is called. It doesn’t matter what the value was named in the caller, in print_twice its name is param.

3.5. Variables and parameters are local¶

When you create a local variable inside a function, it only exists inside the function, and you cannot use it outside. For example:

def cat_twice(part1, part2):
    cat = part1 + part2
    print_twice(cat)

This function takes two arguments, concatenates them, and then prints the result twice. We can call the function with two strings:

>>> chant1 = "Pie Jesu domine, "
>>> chant2 = "Dona eis requiem."
>>> cat_twice(chant1, chant2)
Pie Jesu domine, Dona eis requiem.
Pie Jesu domine, Dona eis requiem.

When cat_twice terminates, the variable cat is destroyed. If we try to print it, we get an error:

>>> print(cat)
NameError: name 'cat' is not defined

Parameters are also local. For example, outside the function print_twice, there is no such thing as param. If you try to use it, Python will complain.

3.6. Stack diagrams¶

To keep track of which variables can be used where, it is sometimes useful to draw a stack diagram. Like state diagrams, stack diagrams show the value of each variable, but they also show the function to which each variable belongs.

Each function is represented by a frame. A frame is a box with the name of a function beside it and the parameters and variables of the function inside it. The stack diagram for the previous example looks like this:

The order of the stack shows the flow of execution. print_twice was called by cat_twice, and cat_twice was called by __main__, which is a special name for the topmost function. When you create a variable outside of any function, it belongs to __main__.

Each parameter refers to the same value as its corresponding argument. So, part1 has the same value as chant1, part2 has the same value as chant2, and param has the same value as cat.

If an error occurs during a function call, Python prints the name of the function, and the name of the function that called it, and the name of the function that called that, all the way back to the top most function.

To see how this works, create a Python script named tryme2.py that looks like this:

def print_twice(param):
    print(param)
    print(param)
    print(cat)

def cat_twice(part1, part2):
    cat = part1 + part2
    print_twice(cat)

chant1 = "Pie Jesu domine, "
chant2 = "Dona eis requim."
cat_twice(chant1, chant2)

We’ve added the statement, print(cat) inside the print_twice function, but cat is not defined there. Running this script will produce an error message like this:

Traceback (innermost last):
  File "tryme2.py", line 12, in <module>
    cat_twice(chant1, chant2)
  File "tryme2.py", line 8, in cat_twice
    print_twice(cat)
  File "tryme2.py", line 4, in print_twice
    print(cat)
NameError: global name 'cat' is not defined

This list of functions is called a traceback. It tells you what program file the error occurred in, and what line, and what functions were executing at the time. It also shows the line of code that caused the error.

Notice the similarity between the traceback and the stack diagram. It’s not a coincidence. In fact, another common name for a traceback is a stack trace.

3.7. Glossary¶

argument

A value provided to a function when the function is called. This value is assigned to the corresponding parameter in the function.

body

The second part of a compound statement. The body consists of a sequence of statements all indented the same amount from the beginning of the header. The standard amount of indentation used within the Python community is 4 spaces.

compound statement

A statement that consists of two parts:

header - which begins with a keyword determining the statement type, and ends with a colon.
body - containing one or more statements indented the same amount from the header.

The syntax of a compound statement looks like this:

keyword expression:
    statement
    statement ...

flow of execution

The order in which statements are executed during a program run.

frame

A box in a stack diagram that represents a function call. It contains the local variables and parameters of the function.

function

A named sequence of statements that performs some useful operation. Functions may or may not take parameters and may or may not produce a result.

function call

A statement that executes a function. It consists of the name of the function followed by a list of arguments enclosed in parentheses.

function composition

Using the output from one function call as the input to another.

function definition

A statement that creates a new function, specifying its name, parameters, and the statements it executes.

header

The first part of a compound statement. Headers begin with a keyword and end with a colon (:)

import

A statement which permits functions and variables defined in a Python script to be brought into the environment of another script or a running Python shell. For example, assume the following is in a script named tryme.py:

def print_thrice(thing):
    print(thing)
    print(thing)
    print(thing)

n = 42
s = "And now for something completely different..."

Now begin a python shell from within the same directory where tryme.py is located:

$ ls
tryme.py
$ python
>>>

Three names are defined in tryme.py: print_thrice, n, and s. If we try to access any of these in the shell without first importing, we get an error:

>>> n
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
NameError: name 'n' is not defined
>>> print_thrice("ouch!")
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
NameError: name 'print_thrice' is not defined

If we import everything from tryme.py, however, we can use everything defined in it:

>>> from tryme import *
>>> n
42
>>> s
'And now for something completely different...'
>>> print_thrice("Yipee!")
Yipee!
Yipee!
Yipee!
>>>

Note that you do not include the .py from the script name in the import statement.

local variable

A variable defined inside a function. A local variable can only be used inside its function.

parameter

A name used inside a function to refer to the value passed as an argument.

stack diagram

A graphical representation of a stack of functions, their variables, and the values to which they refer.

traceback

A list of the functions that are executing, printed when a runtime error occurs. A traceback is also commonly refered to as a stack trace, since it lists the functions in the order in which they are stored in the runtime stack.

3.8. Exercises¶

Using a text editor, create a Python script named tryme3.py . Write a function in this file called nine_lines that uses three_lines to print nine blank lines. Now add a function named clear_screen that prints out twenty-five blank lines. The last line of your program should be a call to clear_screen.
Move the last line of tryme3.py to the top of the program, so the function call to clear_screen appears before the function definition. Run the program and record what error message you get. Can you state a rule about function definitions and function calls which describes where they can appear relative to each other in a program?
Starting with a working version of tryme3.py , move the definition of new_line after the definition of three_lines. Record what happens when you run this program. Now move the definition of new_line below a call to three_lines(). Explain how this is an example of the rule you stated in the previous exercise.
Fill in the body of the function definition for cat_n_times so that it will print the string, s, n times:
```
def cat_n_times(s, n):
    <fill in your code here>
```
Save this function in a script named import_test.py. Now at a unix prompt, make sure you are in the same directory where the import_test.py is located ( ls should show import_test.py). Start a Python shell and try the following:
```
>>> from import_test import *
>>> cat_n_times('Spam', 7)
SpamSpamSpamSpamSpamSpamSpam
```
If all is well, your session should work the same as this one. Experiment with other calls to cat_n_times until you feel comfortable with how it works.